Engine Brackets


How to Determine Transom Angle
Single Engine Transom Layout
Double Engine Transom Layout

Transom Angle (Degrees)

Measuring The Transom Angle (Degrees):
Using a standard carpenter's square ruler, slide the long side of the ruler (24") under the boat at the keel point. Slide forward until the short side of the rule (16") touches the transom straight up. Measuure the distance from the keel point to the inside corner of carpenter’s square ruler (see sketch). Each 1/4" is equal to 1° degree. Example: 3” equal to 12? degrees.

If you have any questions, please call us at 305-265-7922

 

   
home | products | services | request a quote
©2018 A&J Marine Welding All Rights Reserved. Design by International Advertising